STM Series
Dual-rod Linear Slide Air Cylinder (Φ10~Φ25)
Introduction
STM Series are sliding platform cylinders. Various specifications of cylinders and cylinder mounting accessories are available for customers to choose from.
Contact us
Basic Parameters
Action mode: double-acting
Working medium: air (filtered by 40μm filter)
Operating pressure range: 0.1~1.0MPa (14~145Psi)
Guaranteed pressure resistance: 1.5MPa (215Psi)
Working temperature: -20~70℃ (under non-freezing conditions)
Operating speed range: 30~500mm/s
Stroke tolerance range: 0~150 0+1.0 ; 150 0+1.4
Buffer method: crash pad; hydraulic buffer
Non-rotational accuracy: ±0.1°; ±0.05° (non-rotational accuracy is the angle at which the cylinder fixing plate can be rotated when the cylinder is fully retracted)
Connecting pipe diameter: M5x0.8, PT1/8 (NPT and G threads are available for selection)
Features
Installation and fixing method: body installation and slider installation.
The double piston rod structure makes the cylinder have better anti-bending and anti-torsion performance, and can withstand large motion loads or side loads.
Both ends are equipped with buffer devices (such as crash pads, hydraulic buffers, etc.), which can effectively slow down the impact speed and prolong the service life of the cylinder.
The selection of high temperature resistant sealing materials can ensure the normal operation of the cylinder under the condition of 150 ℃.
* If you need to customize according to your special needs, please contact us.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
