Location: Home > Product  

AC2010 Series
Air Source Treatment Modular (2 in 1)

AC2010 Series Air Source Treatment Modular

Introduction

AC2010 Series air source treatment modulars (2 in 1) are mainly composed of AW2000 Series filter regulator and AL2000 Series lubricators.

Contact us

Basic Parameters


Working fluid: air

Port size: PT1/4; PT3/8; PT1/2; PT3/4; PT1

Filter accuracy: 5μm

Working pressure range: 0~1.0Mpa

Pressure regulation range: 0.5~8.5kgf/cm2

Maximum adjustable pressure: 9.5kgf/cm2

Guaranteed pressure resistance: 15kgf/cm2

Operating temperature range: 5~60℃

Water cup capacity: 15CC; 60CC

Oil cup capacity: 25CC; 90CC

Recommended lubricant: ISO VG32 or similar products

Body material: die-casting aluminum alloy

Features


The pressure regulating valve adopts a rolling diaphragm, and when the pressure at the input end fluctuates, the diaphragm will automatically adjust to make the pressure output smoothly.

The two-stage three-step filter can effectively remove impurities such as oil, water and dust in the compressed air.

The filter element has a long service life and does not need to be replaced as a whole, which greatly saves costs.

Adopt balanced air intake, and equipped with relief device.

Adopt automatic drainage structure.

* If you need to customize according to your special needs, please contact us.


  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.