VF Series
5/2, 5/3 Manual Override Pneumatic Solenoid Valve
Introduction
VF Series 5/2, 5/3 Manual Override Pneumatic Solenoid Valve is the basic element of automation for controlling air flow. The movement of the valve body is controlled by electrical signals to block or leak different amounts of air, and finally the mechanical movement of the cylinder and other actuators can be controlled. When VF series is normally operating, manual override is allowed.
Contact us
Basic Parameters
Working medium: air (filtered by 40μm filter)
Action method: internal pilot
Working mode: normally closed; normally open
Number of positions: five-way two-position (5/2); five-way three-position (5/3)
Coil and position: single coil double position (1C2P); double coil double position (2C2P); double coil three position closed center (2C3P-Closed); double head three position exhausted center (2C3P-Exhausted); double head three position pressure center (2C3P-Pressure)
Effective cross-sectional area: 30cm2(CV=1.67); 50cm2(CV=2.79)
Operating voltage: 110VAC, 220VAC (50/60Hz); 12VDC, 24VDC
Voltage range: ±10%
Power consumption: AC 4.5VA; DC 3.0W
Excitation time:<0.05s
Maximum operating frequency: 5 times/second (under no-load state)
Lubrication: not required
Working temperature: 5~60℃
Working pressure: 21~114psi
Maximum pressure resistance: 150psi
Protection class: IP65 (DIN40050)
Connection method: junction box type; direct outlet type
Body material: aluminum alloy
Sealing material: NBR
Insulation heat resistance class: F class
Port size: 1/4"; 3/8"
* If you need to customize according to your special needs, please contact us.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
