2V Series
2/2 Normally Closed Pneumatic Solenoid Valve
Introduction
2V Series 2/2 Normally Closed Pneumatic Solenoid Valve is the basic element of automation for controlling air flow. The movement of the valve body is controlled by electrical signals to block or leak different amounts of air, and finally the mechanical movement of the cylinder and other actuators can be controlled.
Contact us
Basic Parameters
Working medium: air (filtered by 40μm filter)
Action method: direct action; internal pilot
Working method: normally closed
Number of positions: two-way two-position (2/2)
Effective cross-sectional area: 4.9cm2(CV=0.27); 132cm2(CV=7.30); 490cm2(CV=27.00)
Operating voltage: 24VAC, 110VAC, 220VAC, 380VAC (50/60Hz); 12VDC, 24VDC
Voltage range: ±10%
Power consumption: AC 4.5VA; DC 3.0W
Excitation time:<0.05s
Maximum operating frequency: 10 times/second (under no-load state)
Lubrication: not required
Working temperature: -10~60℃
Working pressure: 0~172psi; 11.4~143psi
Maximum pressure resistance: 229psi; 171psi
Protection class: IP65 (DIN40050)
Connection method: terminal type
Body material: aluminum alloy; copper (nickel-plated); brass
Sealing material: VITON; NBR
Insulation heat resistance class: B class
Port size: G1/8; G1/4; G3/8; G1/2; G3/4; G1
* If you need to customize according to your special needs, please contact us.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
